How to Use and Care for a Package Free Safety Razor

By Package Free Shop | Shop Zero Waste & Other Eco-Friendly | Published: 2026-10-25

Category: How-to Guides

Learn how to use and maintain a package free safety razor for a smooth, zero waste shave. This guide covers prep, technique, cleaning, and storage to extend its life.

Quick Answer

To get a smooth, irritation-free shave with a package free safety razor, prep your skin with warm water and a shaving soap, hold the razor at a 30-degree angle, use short strokes without pressing, and rinse the blade often. After each use, dry the razor completely to prevent corrosion.

Why Switch to a Safety Razor?

A package free safety razor eliminates the plastic waste from disposable razors and cartridges. The brass construction of models like the Well Kept Essentials Brass Safety Razor is built to last for years, making it a true zero waste investment. The single, double-edged blade also provides a closer shave with less irritation once you learn the technique.

Common Mistakes to Avoid

Pressing too hard is the most frequent error. Safety razors are designed to do the work with their weight alone. Another common mistake is shaving without proper prep—dry skin leads to tugging and razor burn. Finally, storing a wet razor causes rust and dulls the blade faster.

Step-by-Step Guide to Using and Caring for Your Safety Razor

Step 1: Prep Your Skin and Blade: Wash your face or body with warm water to soften hair and open pores. Apply a shaving soap or cream using a brush for a rich lather. If using a new blade, rinse it with hot water to remove any manufacturing residue. Skipping prep is the top cause of razor burn.
Step 2: Hold the Razor at the Correct Angle: Hold the handle so the head rests flat against your skin, then tilt until you hear the blade make contact—about 30 degrees. Shave in the direction of hair growth using short, 1-2 inch strokes. Do not apply pressure; let the razor's weight do the cutting. If the blade feels like it's scraping, the angle is too steep.
Step 3: Rinse and Relather Between Passes: After each stroke, dip the razor head in water or rinse under a tap to clear hair and lather. Reapply shaving cream before going over the same area. For a closer shave, you can make a second pass across the grain, but relather first. Shaving dry or without relathering causes irritation and missed hairs.
Step 4: Rinse, Dry, and Store the Razor: After shaving, rinse the razor head thoroughly under hot water. Shake off excess water and pat dry with a towel. Store the razor in a dry place outside the shower to prevent moisture buildup. Replace the blade every 5-7 shaves for optimal sharpness. A wet razor left in the shower will corrode faster, shortening its lifespan.

Product Used in This Guide

Well Kept Essentials Brass Safety Razor – Package Free: Help reduce plastic waste with this plastic free sleek Brass Safety Razor. Not only will it get the job done, it will look so great in your bathroom! The brass body is durable and recyclable, so you won't need to buy disposable cartridges again—just replace the blade every 5-7 shaves.
Well Kept Essentials Brass Safety Razor – Package Free